Installation Procedure

Fig 1: Removing BCM

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE

Install the BCM screws.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
Install the right console trim panel. Refer to CONSOLE TRIM PANEL REPLACEMENT - RIGHT .
Connect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE .
For a new or remanufactured BCM, program the BCM. Refer to BODY CONTROL MODULE (BCM) PROGRAMMING/RPO CONFIGURATION .
Program the BCM after replacement. Refer to CONTROL MODULE REFERENCES .