Installation Procedure

Fig 1: View Of Generator Bracket Bolts

Courtesy of GENERAL MOTORS CORP.

Install the generator bracket.
NOTE: Refer to FASTENER NOTICE .
Install the generator bracket bolts.
Tighten: Tighten the bolts in sequence to 50 N.m (37 lb ft).

Fig 2: View Of Drive Belt Tensioner Bolt
Courtesy of GENERAL MOTORS CORP.
Install the drive belt tensioner.
Install the drive belt tensioner bolt.
Tighten: Tighten the bolt to 50 N.m (37 lb ft).
Install the drive belt idler pulley.
Install the drive belt idler pulley bolt.
Tighten: Tighten the bolt to 50 N.m (37 lb ft).

Fig 3: View Of Drive Belt
Courtesy of GENERAL MOTORS CORP.
Install the generator. Refer to GENERATOR REPLACEMENT (L61) or GENERATOR REPLACEMENT (LX9) .
Rotate the drive belt tensioner counterclockwise.
Install the accessory drive belt. Refer to DRIVE BELT REPLACEMENT .
Connect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE .