LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Optra5 LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Lighting Systems) >> Repair Instructions >> Daytime Running Lights (DRL) Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Daytime Running Lamp Module And Screws
    GM1256512Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the daytime running lamp module with the bolts.

    Tighten:  Tighten the daytime running lamp module bolts to 2 N.m (18 lb in)  .

  4. Install the instrument panel under cover.
  5. Connect the negative battery cable.