Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Exhaust Tail Pipe Flow Valve Control Module

Courtesy of GENERAL MOTORS CORP.

Install the exhaust tail pipe flow valve control module.
Attach the exhaust tail pipe flow valve control module using a new piece of two-sided tape.

Fig 2: Identifying Exhaust Tail Pipe Flow Valve Control Module Connector

Courtesy of GENERAL MOTORS CORP.

Connect both electrical connectors.
Install the battery.
Refer to Control Module References for programming and setup information.