Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Remove the battery.

Fig 1: Identifying Exhaust Tail Pipe Flow Valve Control Module Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect both electrical connectors.
Detach the exhaust tail pipe flow valve control module by pulling off two-sided tape.

Fig 2: Identifying Exhaust Tail Pipe Flow Valve Control Module

Courtesy of GENERAL MOTORS CORP.

Remove the exhaust tail pipe flow valve control module.