Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Cooling Fan Control Module

Courtesy of GENERAL MOTORS CORP.

Install the cooling fan control module to the vehicle.

NOTE: Refer to Fastener Notice .

Install the cooling fan control module retaining bolt.
Tighten: Tighten the bolt to 6 N.m (53 lb in).

Fig 2: View Of Cooling Fan Control Module Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the cooling fan control module electrical connector.
Lower the vehicle.
Refer to Control Module References for programming and setup information.