LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Power Roof System) >> Diagnostic Information and Procedures >> Scan Tool Output Controls
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Output Controls

WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: To reduce the risk of personal injury or vehicle damage, the deck lid needs to be fully extended upward and the hydraulic system needs to be disabled. The hydraulic bypass valve needs to be turned counterclockwise to inhibit the system from moving out of sequence.
CAUTION: To reduce the risk of personal injury or vehicle damage, stay clear of the folding top panels and linkage. The disconnection of a valve harness connector may cause the folding top assembly to drift to a mechanical resting position.
Folding Top Control (FTC) Module

Scan Tool Output Control Additional Menu Selection(s) Description
Valve 1 Roof, Special Functions, Folding Top Module The folding top control (FTC) module commands Valve 1 to energize. As the valve is energized, a click can be heard, activating the valve.
Valve 2 Roof, Special Functions, Folding Top Module The FTC module commands Valve 2 to energize. As the valve is energized, a click can be heard, activating the valve.
Valve 3 Roof, Special Functions, Folding Top Module The FTC module commands Valve 3 to energize. As the valve is energized, a click can be heard, activating the valve.
Pump Motor X Direction Roof, Special Functions, Folding Top Module The FTC module commands the pump motor to operate in the X direction when you select direction X. The motor should operate in the requested direction.
Pump Motor Y Direction Roof, Special Functions, Folding Top Module The FTC module commands the pump motor to operate in the Y direction when you select direction Y. The motor should operate in the requested direction.
Body Control Module (BCM)

Scan Tool Output Control Additional Menu Selection(s) Description
Tonneau Relay Roof, Special Functions, Body Control Module, Miscellaneous Tests The body control module (BCM) energizes the tonneau release relay when you select On. The release relay should then command the folding top cover latch actuator to release the folding top cover.