Wiper Motor Module Replacement

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wiper Motor & Wiper System Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the wiper arms. Refer to Wiper Arm Replacement . Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
1	Wiper System Module Bolts (Qty: 3) NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in)
2	Wiper System Module Nut Tighten: 10 N.m (89 lb in)
3	Wiper Motor Nut (Qty: 3) Tighten: 10 N.m (89 lb in)
4	Wiper Drive System Module
5	Wiper Motor Tip: Disconnect the electrical connector.