Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 6.0L.

Fig 1: Surge Tank Inlet Hose Assembly

Courtesy of GENERAL MOTORS CORP.

Disconnect the surge tank inlet hose assembly from the radiator support tabs.

Fig 2: Radiator Support & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the radiator support bolts.

IMPORTANT: Note the position of the radiator support in relationship to the fan shroud. This must be reassembled correctly in order to retain the fan shroud.

Fig 3: Radiator Support

Courtesy of GENERAL MOTORS CORP.

Remove the radiator support.