Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Cooling Fan Control Module

Courtesy of GENERAL MOTORS CORP.

Install the cooling fan control module to the vehicle.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the cooling fan control module retaining bolt.
Tighten: Tighten the bolt to 6 N.m (53 lb in).

Fig 2: View Of Cooling Fan Control Module Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the cooling fan control module electrical connector.
Lower the vehicle.