LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Instrument Panel Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of SIR Module, Bracket & Retaining Nuts
    GM1226225Courtesy of GENERAL MOTORS CORP.
  1. Install the I/P module to the bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the I/P module mounting fasteners. Tighten the fasteners in the order shown in the graphic.

    Tighten:  Tighten the fasteners to 10 N.m (89 lb in).

  3. Connect the pigtail connector to the I/P module.
  4. Install the CPA to the harness connector on the I/P module.
  5. Install the I/P assembly. Refer to Instrument Panel Assembly Replacement .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals