Theft Deterrent Module Programming and Setup: Notes
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Each of the following service procedures requires programming or setup procedures to be performed on the theft deterrent control module.
Theft Deterrent Control Module Replacement See Theft Deterrent Control Module Replacement
If the theft deterrent control module is replaced, the following procedures must be performed:
1. Set Up a New Theft Deterrent Control Module-Refer to Programming Theft Deterrent System Components
2. 10-Minute Relearn Procedure-Refer to Programming Theft Deterrent System Components
Replacing Keys
If a key is replaced, the following procedure must be performed: Replacing Keys
Adding Keys
If a key is being added, the following procedure must be performed: Adding Keys