Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Accelerator Pedal

Courtesy of GENERAL MOTORS CORP.

Position the accelerator pedal (1) to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the accelerator pedal bolts (2).
Tighten: Tighten the bolts to 5 N.m (44 lb in).
Connect accelerator pedal electrical connector.
Install the left instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.