Disc Brake Component Specifications

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Application	Specification
Application	Metric	English
Front Brake Pads (16 in and 17 in)
Taper	0.15 mm	0.006 in
Front Brake Rotor (16 in)
Rotor Diameter	303 mm	11.93 in
Rotor Discard Thickness	28.6 mm	1.126 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness after Refinishing	XX mm	XX in
Rotor Thickness (New)	30 mm	1.181 in
Front Brake Rotors (17 in)
Rotor Diameter	323 mm	12.72 in
Rotor Discard Thickness	28.6 mm	1.126 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness after Refinishing	29.6 mm	1.165 in
Rotor Thickness (New)	30 mm	1.181 in
Rear Brake Pads
Taper	0.15 mm	0.006 in
Rear Brake Rotor
Rotor Diameter	292 mm	11.50 in
Rotor Discard Thickness	9.0 mm	0.354 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness after Refinishing	9.35 mm	0.368 in
Rotor Thickness (New)	11 mm	0.433 in