Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Brake Control Module (EBCM)
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| ABS Relay | - | Commands the Antilock Brake System (ABS) relay ON and OFF. |
| Automated Bleed | - | Used in order to bleed the ABS hydraulics. Refer to Antilock Brake System Automated Bleed Procedure . |
| Automated Test | - | Cycles each solenoid valve and the pump motor in order to verify component operation. This test is identical to the Initialization Sequence. If a malfunction is detected, the electronic brake control module (EBCM) will set the appropriate DTCs. The DTCs will be displayed upon completion of the test. |