LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Body Front End) >> Repair Instructions >> Splash Shield Replacement - Engine >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Right Engine Splash Shield & Retainers
    GM317814Courtesy of GENERAL MOTORS CORP.
  1. Install the engine splash shield to the lower flange of the engine compartment side rail.
  2. Route the ABS lead through the slot in the engine splash shield.
    3. Fig 2: Engine Splash Shield & Retainers
    GM317813Courtesy of GENERAL MOTORS CORP.
  3. Align the holes in the engine splash shield to holes in the outboard side engine compartment side rail.
  4. Install the push-in retainers to the engine splash shield.
scientia non olet · About LEMON Manuals