Installation Procedure
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Position the seal to the washer solvent container, pressing in until fully seated.
- Position the washer solvent level sensor to the washer solvent container, pressing in until fully seated.
- Connect the washer solvent level sensor electrical connector.
- Install the right front fender liner. Refer to Fender, Fender Insulator, Wheelhouse Liner Replacement - Front in Body Front End.
- Fill the washer solvent container with washer solvent.
Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor