Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Vehicle Location Antenna Module Bracket Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the instrument panel (I/P) trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
Remove the vehicle location antenna module bracket bolts (3, 4, 5).
Remove the communication interface module screws.
Lower the communication interface module to the floor.

Fig 2: View Of Antenna Module Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the vehicle location antenna module bracket.