LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Aveo Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls & Fuel - 1.6L - Introduction (2 Of 2) >> Repair InstructionsEngine Control Module Replacement >> Throttle Body Assembly ReplacementRemoval Procedure >> Removal ProcedureInstallation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal ProcedureInstallation Procedure

    Fig 1: View Of Throttle Body And Intake Manifold
    GM1241566Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the air intake tube from the throttle body.
  3. Disconnect the throttle cables by opening the throttle and moving the cable through the release slot.
    4. Fig 2: View Of TP Sensor And IAC Valve Connectors
    GM1241930Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the vacuum hoses from the throttle body.
  5. Disconnect the throttle position (TP) sensor and the idle air control valve connectors.
    6. Fig 3: View Of Throttle Body Assembly And Retaining Bolts
    GM1241931Courtesy of GENERAL MOTORS CORP.
  6. Remove the coolant hoses from the throttle body.
  7. Remove the throttle body retaining bolts.
  8. Remove the throttle body and discard the gasket.
  9. Remove the TP sensor.
  10. Remove the idle air control (IAC) valve.
scientia non olet · About LEMON Manuals