LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Aveo Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Immobilizer System) >> Repair Instructions >> Programming Additional Keys >> Key Coding Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key Coding Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the immobilizer control unit cartridge in the scan tool.
  2. Turn the ignition off
  3. Connect the scan tool
  4. Turn the ignition on with the key to be coded
  5. Enter the four-digit password that enables service personnel to use the scan tool for key coding.
  6. Use the scan tool command.
  7. Verify that the key coding was successful by starting the engine with each of the authorized keys.
scientia non olet · About LEMON Manuals