Installation Procedure

Fig 1: Cruise Control Module, Cruise Control Bracket & Nuts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the nuts (2) that retain the cruise control module (3) to the cruise control bracket (1).
Tighten: Tighten the nuts to 5 N.m (44 lb in).
Connect the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement .
Connect the electrical connector to the cruise control module.
Install the air cleaner assembly to the vehicle.
- For the 4.3L engine, refer to Air Cleaner Assembly Replacement .
- For the 4.8L, 5.3L, or 6.0L engine, refer to Air Cleaner Assembly Replacement .
Close the hood.
Refer to Control Module References for programming and setup information.