Scan Tool Data Definitions
The ABS scan tool data definitions contain a brief description of all ABS related parameters available on the scan tool. The parameters available on the scan tool are listed below in alphanumeric order.
- ABS Active
-
The scan tool displays Yes/No. The scan tool displays No when a when not active.
- ABS Failed
-
The scan tool displays On/Off. The scan tool displays On when a when the ABS Failed.
- Brake Fluid Level Status
-
The scan tool displays OK/Low The scan tool indicates Low when the brake fluid sensor detects fluid lose.
- BPP Signal
-
The scan tool will display Released/Applied depending on the state of the brake pedal position.
- Battery Voltage Signal
-
The scan tool will display Voltage depending on the state of the battery and charging system.
- DRP Active
-
The scan tool will display Yes/No depending on the state of the DRP.
- DRP Disabled
-
The scan tool will display Yes/No depending on the state of the DRP.
- LF Wheel Speed Sensor
-
The scan tool displays 0-327 km/h (0-204 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving.
- LR Wheel Speed Sensor
-
The scan tool displays 0-327 km/h (0-204 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving.
- LF Outlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the left front Outlet valve solenoid is commanded on.
- LR Outlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the left front Outlet valve solenoid is commanded on.
- Pump Motor Command Voltage
-
The scan tool displays battery voltage when the pump motor is commanded on.
- RF Outlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the right front Outlet valve solenoid is commanded on.
- RF Inlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the right front Inlet valve solenoid is commanded on.
- RF Wheel Speed Sensor
-
The scan tool displays 0-327 km/h (0-204 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving.
- RR Wheel Speed Sensor
-
The scan tool displays 0-327 km/h (0-204 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving.
- RR Outlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the right front Inlet valve solenoid is commanded on.
- RR Inlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the right front Inlet valve solenoid is commanded on.