LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> HHR LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls & Fuel - 2.2L - Introduction (2 Of 2) >> Repair Instructions >> Knock Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Knock Sensor
    GM1578476Courtesy of GENERAL MOTORS CORP.
  1. Install the KS.
    2. NOTE: Refer to Fastener Notice .
  2. Install the KS bolt.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

    3. Fig 2: Engine Harness
    GM1622787Courtesy of GENERAL MOTORS CORP.
  3. Connect the KS harness electrical connector (6).
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals