LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 5.3L - Introduction (2 Of 2) >> Repair Instructions >> Knock Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Left Knock Sensor Electrical Connector
    GM1554554Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Draining and Filling Cooling System (LS4 GE 47716 Fill) or Draining and Filling Cooling System (LS4 Static Fill) .
  2. Disconnect the left knock sensor electrical connector, if required.
    3. Fig 2: Left Knock Sensor
    GM1551881Courtesy of GENERAL MOTORS CORP.
  3. Remove the left knock sensor bolt, if required.
  4. Remove the left knock sensor, if required.
    5. Fig 3: Crankshaft Position (CKP) Sensor Electrical Connector
    GM1554552Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the right knock sensor electrical connector (2), if required.
    6. Fig 4: Right Knock Sensor
    GM1551882Courtesy of GENERAL MOTORS CORP.
  6. Remove the right knock sensor bolt, if required.
  7. Remove the right knock sensor, if required.
scientia non olet · About LEMON Manuals