Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Brake Control Module (EBCM)
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| ABS Relay | - | Commands the Antilock Brake System (ABS) relay ON and OFF. |
| Automated Bleed | - | Used in order to bleed the ABS hydraulics. Refer to Antilock Brake System Automated Bleed Procedure . |
| Automated Test | - | Cycles each solenoid valve and the pump motor in order to verify component operation. This test is identical to the Initialization Sequence. If a malfunction is detected, the electronic brake control module (EBCM) will set the appropriate DTCs. The DTCs will be displayed upon completion of the test. |