Assembly Procedure

Install the coil spring and upper strut mount to the J 45400 . See Special Tools .

Fig 1: View Of Compressor Forcing Screw & Coil Spring
Courtesy of GENERAL MOTORS CORP.
Turn the spring compressor forcing screw (1) until the coil spring is compressed.
Install the strut to the coil spring and upper strut mount.
Install the strut retaining nut.
Using the J 42991 and a 45 TORX® socket, install the strut mount nut. See Special Tools .

Tighten: Tighten the strut mount nut to 70 N.m (52 lb ft).

Fig 2: Removing/Installing Strut Retaining Nut
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .
Remove the strut from the J 45400 . See Special Tools .
Install the strut to the vehicle. Refer to Strut Assembly Replacement .