LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Optra LS, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - ZF 4HP 16 - Specifications, Component Locations And Repairs >> Repair Instructions >> Gearshift Control Lever Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Gearshift Housing Bolts And Nuts
    GM1290876Courtesy of GENERAL MOTORS CORP.
  1. Install the shift control assembly.
    2. NOTE: Refer to Fastener Notice .
  2. Install the bolts and the nuts holding the shift control assembly to the floor panel.

    Tighten:  Tighten the bolts and the nuts to 8 N.m (71 lb in)  .

    3. Fig 2: View Of Shift Control Cable Adjuster, Bracket And Pinch Nut
    GM1290875Courtesy of GENERAL MOTORS CORP.
  3. Install the shift control cable onto the bracket.
  4. Install the adjuster pinch nut to the cable.

    Tighten:  Tighten the pinch nut to 8 N.m (71 lb in)  .

    5. Fig 3: Identifying Gearshift Control Electrical Connectors
    GM1290874Courtesy of GENERAL MOTORS CORP.
  5. Connect the electrical switch connectors.
  6. Install the floor console. Refer to Front Floor Console Replacement .
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals