LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Optra LS, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle - D16 >> Repair Instructions >> Shift Control Linkage Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Transaxle Rear Mounting Bracket And Fixing Shaft Pin
    GM1248179Courtesy of GENERAL MOTORS CORP.
  1. Install the shift linkage assembly.
  2. Install the fixing shaft pin and connect the linkage connection part to the transaxle rear mounting bracket.
  3. Fig 2: View Of Universal Joint, Clip And Bolt
    GM1248177Courtesy of GENERAL MOTORS CORP.
  4. Install the universal joint to the transaxle.
  5. Install the clip and the bolt from universal joint.
  6. Install the rod clamp. Refer to Shift Linkage Adjustment .
  7. Adjust the shift linkage. Refer to Shift Linkage Adjustment .
  8. Connect the negative battery cable.