LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> W 3500 Tiltmaster L4-5.2L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation

Engine Coolant Temperature (ECT) Sensor

Installation

1. Apply Loctite 262 or equivalent to the threads of the ECT sensor, and tighten it to the specified torque.

Tightening torque: 25 N.m (18 lb.ft)







2. Connect the harness connector to the ECT sensor.
3. Replenish the cooling water.
- Refer to 'Reference (cooling water replenishment procedure)' part of 'Cooling System'.
scientia non olet · About LEMON Manuals