Windshield Washer Switch: Service and Repair

Windshield Wiper and Washer Switch Replacement

Removal Procedure

1. Remove the steering column trim covers.
2. Disconnect the windshield wiper/windshield washer switch connector.




3. Depress the locking tabs and remove the windshield wiper/windshield washer switch.

Installation Procedure




1. Install the windshield wiper/windshield washer switch to the steering column.
Ensure the locking tabs are fully engaged.
2. Connect the windshield wiper/windshield washer switch harness connector.
3. Install the steering column trim covers.