Circuit/System Testing
WARNING: This page is about a different car, the 2010 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the B24 cellular phone microphone.
- Test for less than 10 Ω between the low reference circuit terminal A and ground.
- If greater than the specified range, test the circuit for an open/high resistance.
- Ignition ON, test for 9.5-10.5 V between the signal circuit terminal B and ground.
- If less than the specified range, test the circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the CIM.
- If greater than the specified range, test the circuit for a short to voltage. If the circuit tests normal, replace the CIM.
- If all circuits test normal, replace the B24 cellular phone microphone.