Communication Interface Module Replacement

WARNING: This page is about a different car, the 2008 Saturn Sky and 2008 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Communication Interface Module & Bracket Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear window panel trim. Refer to Rear Window Panel Trim Replacement . Program the communication interface module (OnStar®) after replacement. Refer to Control Module References .
1	Communication Interface Module Bracket Bolt/Screw NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in)
2	Communication Interface Module Assembly

Callout

Component Name

Preliminary Procedures

Remove the rear window panel trim. Refer to Rear Window Panel Trim Replacement .
Program the communication interface module (OnStar®) after replacement. Refer to Control Module References .

Communication Interface Module Bracket Bolt/Screw

NOTE: Refer to Fastener Notice .

Tighten: 10 N.m (89 lb in)

Communication Interface Module Assembly