LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 5.3L - DTC P0016 To DTC P0358 >> DTC P0340 >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

IMPORTANT: You must perform the Circuit/System Testing before proceeding with Component Testing.
  1. Inspect the CMP sensor for correct installation. Remove the CMP sensor from the engine and inspect the sensor O-ring for damage.
    • If the sensor is loose, incorrectly installed, or damaged, replace the CMP sensor.
  2. Connect the CMP sensor harness connector to the CMP sensor.
  3. Ignition ON, engine OFF. Observe the CMP Active counter parameter on the scan tool.
  4. Pass a flat steel object across the tip of the sensor repeatedly. The CMP Active counter parameter should increment with each pass of the steel object.
    • If the parameter does not increment, replace the CMP sensor.
scientia non olet · About LEMON Manuals