Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Battery Current Sensor

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.

Install the battery current sensor (1) by passing the ground ends of the negative battery cable through the sensor.
Measure from the same end as earlier, and slide the current sensor to that measurement on the negative battery cable.
Install the battery negative cable. Refer to Battery Negative Cable Replacement (LAT) or Battery Negative Cable Replacement (LE5 or LE9) or Battery Negative Cable Replacement (LZ4 or LZE) or Battery Negative Cable Replacement (LY7) .