LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Adjustable Pedal System) >> Repair Instructions >> Adjustable Pedal Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
    2. Fig 1: Identifying Adjustable Pedal Module In Side Of I/P Support Beam
    GM1469984Courtesy of GENERAL MOTORS CORP.
  2. Carefully cut and remove the tie strap securing the adjustable pedal module to the I/P support beam.
  3. Remove the adjustable pedal module (1) from the side of the I/P support beam.
  4. Disconnect the electrical connector from the adjustable pedal module.
scientia non olet · About LEMON Manuals