Installation Procedure

Fig 1: Identifying Glow Plug

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Fig 2: View Of Glow Plug Heat Shield And Bolt

Courtesy of GENERAL MOTORS CORP.

Install the glow plug heat shield.
Tighten:
- Tighten the glow plug heat shield bolt to 20 N.m (14.8 lb ft) .
- Tighten the glow plug heat shield nut engine lift bracket retaining nut to 28 N.m (20.6 lb ft) .

Fig 3: View Of Glow Plug Wiring Harness

Courtesy of GENERAL MOTORS CORP.

Fig 4: View Of Glow Plug Heat Shield And Bolt

Courtesy of GENERAL MOTORS CORP.

Install the PCV valve and adapter. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement .
Install the glow plug heat shield.

Fig 5: View Of Underhood Components

Courtesy of GENERAL MOTORS CORP.

Install the charge air system hoses and ducts. Refer to Charge Air Cooler Inlet Pipe and Outlet Pipe Replacement .
Install engine cover. Refer to Engine Cover Replacement .
Connect the negative battery cable.