LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the hub and bearing assembly to the vehicle. Refer to Rear Wheel Bearing and Hub Replacement (Without Independent Suspension) .
  2. Turn the ignition switch to the ON position, with the engine OFF.
  3. Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals