Removal Procedure

Fig 1: View Of Crankshaft Position Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
Disconnect the crankshaft position (CKP) sensor electrical connector.
Fig 2: View Of CKP Sensor & Bolt
Courtesy of GENERAL MOTORS CORP.

Remove the CKP sensor bolt.
Remove the CKP sensor.
If necessary, remove the CKP sensor spacer bolts.
If necessary, remove the CKP sensor spacer.