Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Outer & Inner Tie Rods

Courtesy of GENERAL MOTORS CORP.

Remove the rack and pinion outer tie rod end. Refer to Steering Linkage Outer Tie Rod Replacement .
Remove the rack and pinion inner tie rod nut and discard it.
Remove the outer steering gear boot clamp.
Cut the inner steering gear boot clamp and discard it.

Fig 2: View Of Steering Gear Boot

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: After removing the boot, inspect the inner tie rod for evidence of corrosion or contamination. If none is evident, continue with the repair. If corrosion or contamination is evident, replace the steering gear.

Remove the steering gear boot from the steering gear.