LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> HHR LS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.0L - Introduction) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying APP Sensor
    GM1633085Courtesy of GENERAL MOTORS CORP.
  1. Install the APP sensor.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the APP sensor nuts.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

  4. Fig 2: Identifying APP Sensor Electrical Connector
    GM1633081Courtesy of GENERAL MOTORS CORP.
  5. Connect the APP sensor electrical connector (1).
  6. Install the insulator panel. Instrument Panel Insulator Replacement .