LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> HHR LS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.0L - Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Pump Module
    GM1636703Courtesy of GENERAL MOTORS CORP.
  1. Carefully slide the fuel level sensor into the slots on the reservoir.
  2. Slide the sensor down until the retaining tabs (2) engage the sensor.
  3. Install the fuel pump module. Refer to Fuel Pump Module Replacement .