LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Impala Police >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.9L - DTC P0010 To DTC P0113 >> DTC P0340 >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

IMPORTANT: You must perform the Circuit/System Testing before proceeding with Component Testing.
  1. Inspect the CMP sensor for looseness and correct installation. Remove the CMP sensor from the engine and inspect the sensor and the O-ring for damage.
    • If the sensor is loose, incorrectly installed, or damaged. Repair or replace the CMP sensor.
  2. Connect the CMP sensor connector to the CMP sensor. Turn ON the ignition, with the engine OFF.
  3. Ignition ON and engine OFF. Observe the CMP Active Counter parameter on the scan tool; pass a steel object by the tip of the sensor repeatedly. The CMP Active Counter parameter should increment.
    • If the parameter does not increment, replace the CMP sensor.
scientia non olet · About LEMON Manuals