Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Shift Lock Control Solenoid

Courtesy of GENERAL MOTORS CORP.

Route the shift lock control solenoid through the opening in the front of the control assembly.

Fig 2: View Of Solenoid & Ball-Sockets

Courtesy of GENERAL MOTORS CORP.

Attach the ball-sockets to the control assembly body and the shift-lock control lever.

Fig 3: Identifying Shift Lock Control Solenoid Connector & Solenoid

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the Shift Lock Control Solenoid.
Install the automatic transaxle control assembly. Refer to Transmission Control Replacement .