LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Traverse LS, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Diagnostic Information and Procedures >> Memory Seat Feature Inoperative >> Component Testing >> Memory Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Memory Switch

  1. Disconnect the harness connector at the memory seat switch.
  2. Test for infinite resistance between the memory switch signal circuit terminal 1 and the switch supply voltage circuit terminal 2.
    • If not infinite, replace the memory seat switch.
  3. Test the resistance between terminal 1 and terminal 2 while pressing the memory 1, memory 2, and EXIT buttons. Compare the resistance readings to the values in the Memory Switch Values table below.
    • If the resistance is not within the specified range, replace the memory seat switch.
Memory Switch Values

Switch Position Resistance
Idle Infinite
Memory 1 2.03K-2.49K Ω
Memory 2 3.83K-4.69K Ω
EXIT 8.33K-10.18K Ω
scientia non olet · About LEMON Manuals