Circuit/System Verification
WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Verify DTC B2485 is not set.
- If DTC B2485 is set , refer to DTC B2485 .
- Set up a Bluetooth ® test tool or equivalent.
- Ignition ON, perform the discovery/search operation with the test tool. Verify the vehicle appears in the list of available devices.
- If the vehicle is not in the list of available devices, repeat the discovery/search operation. If the vehicle is still not in the list of available devices, replace the CIM.
- Follow the instructions provided in the Vehicle Owners Manual for pairing a device. Verify successful pairing with the test tool.
- If pairing is not successful, repeat the pairing process. If pairing is still not successful, replace the CIM.
- Refer to Diagnostic Aids .