Steering Wheel Control Switch Assembly Replacement (Traverse)

WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Steering Wheel Control Switch Assembly (Traverse)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement . Remove the steering wheel. Refer to Steering Wheel Replacement
1	Steering Wheel Rear Cover Screw (Qty: 3) CAUTION: Refer to Fastener Caution .
2	Steering Wheel Rear Cover
3	Steering Wheel Spoke Cover Screw (Qty: 4) CAUTION: Refer to Fastener Caution .
4	Steering Wheel Spoke Cover (Qty: 2) TIP: Use a flat-bladed plastic tool to disengage the 2 detent tabs and carefully pull cover from the 2 retainers.
5	Steering Wheel Control Switch Screw (Qty: 4) CAUTION: Refer to Fastener Caution .
6	Steering Wheel Control Switch Assembly (Qty: 2) Procedure Radio control switch assembly is shown. Cruise control switch assembly is similar. Disconnect the electrical connector.