Circuit/System Verification
WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
- It is necessary to inform the OnStar® Call Center advisor that this call is for vehicle diagnostic purposes.
- It is necessary to have the vehicle in an open outside area where a cellular call can be successfully placed and GPS data can be received from satellites.
- Verify that the horn, lights, and the doors locks on the vehicle operate properly.
- If the applicable system does not operate properly, refer to Diagnostic System Check - Vehicle .
- Contact the OnStar® Call Center by pressing the blue OnStar® button. Verify with the OnStar® advisor that all of the remote functions (door locks, lights, or horn) work.
- If unable to connect with the OnStar® call center, refer to Unable to Contact OnStar Call Center .
- If the remote functions do not operate when requested, replace the CIM.