Installation Procedure

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Battery Negative Cable Extension Cable

Courtesy of GENERAL MOTORS CORP.

Install the battery negative cable extension cable to the engine compartment.

Fig 2: Identifying Battery Negative Extension Cable Ground Bolt & Battery Negative Extension Cable Clip

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the battery negative cable extension cable ground bolt (1) to the left wheelhouse panel upper reinforcement.
Tighten: Tighten the bolt to 58 N.m (43 lb ft).
Install the battery negative cable extension cable clip (3) to the left upper engine compartment support bracket.
Install the battery negative cable extension cable clip (4) to the front compartment side rail.

Fig 3: View Of Battery Negative Extension Cable Ground Bolt & Battery Negative Extension Cable Terminal

Courtesy of GENERAL MOTORS CORP.

Position the battery negative cable extension cable terminal (1) to the cylinder head.
Install the battery negative cable extension cable ground bolt (2) to the cylinder head.
Tighten: Tighten the bolt to 58 N.m (43 lb ft).

Fig 4: Identifying Battery Negative Cable Extension Cable Clip

Courtesy of GENERAL MOTORS CORP.

Install the engine wiring harness to the battery negative cable extension cable clip (2).
Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .