LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Power Seat System) >> Diagnostic Information and Procedures >> Memory Seat Feature Inoperative >> Component Testing >> Memory Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Memory Switch

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the harness connector at the memory seat adjuster switch.
  2. Test for infinite resistance between the signal terminal 1 and the 12 V reference terminal 2.
    • If not the specified value, replace the memory seat adjuster switch.
  3. Test the resistance between terminal 1 and terminal 2 while pressing the memory 1, memory 2, and EXIT buttons. Compare the resistance readings to the values in the Memory Switch Values table below.
    • If the resistance is not within the specified range, replace the memory seat adjuster switch.
Memory Switch Values

Switch Position Resistance
Idle Infinite
Memory 1 2.03K-2.49K Ω
Memory 2 3.83K-4.69K Ω
EXIT 8.33K-10.18K Ω
scientia non olet · About LEMON Manuals