Automatic Transmission Shift Lock Control Actuator Replacement (Traverse)

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Automatic Transmission Shift Lock Control Actuator (Traverse)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the transmission control. Refer to Transmission Control Replacement (Traverse) .
1	Shift Lock Actuator Procedure Disconnect the electrical connector from the shift lock actuator. Press lock on the solenoid wiring connector and remove by pulling on the connector, not the wire. Depress the shift lock actuator retaining tabs and press the solenoid into the base by pushing on the solenoid housing, NOT the white plunger. Connect the electrical connector from the shift lock actuator, ensuring the connector is fully locked into the solenoid. Tip: Ensure the solenoid is fully locked into the base.

Callout

Component Name

Preliminary Procedure:
Remove the transmission control. Refer to Transmission Control Replacement (Traverse) .

Shift Lock Actuator

Procedure

Disconnect the electrical connector from the shift lock actuator. Press lock on the solenoid wiring connector and remove by pulling on the connector, not the wire.
Depress the shift lock actuator retaining tabs and press the solenoid into the base by pushing on the solenoid housing, NOT the white plunger.
Connect the electrical connector from the shift lock actuator, ensuring the connector is fully locked into the solenoid.

Tip: Ensure the solenoid is fully locked into the base.